2) “Sealed Secondary Cells / Batteries Containing Alkaline or Other Non-Acid Electrolytes for Use in Portable Applications |
External short circuit |
IEC 62133-2:2017 (Clause 7.3.1 & 7.3.2) |
Rs. 80,007/- |
Thermal abuse |
IEC 62133-2:2017 (Clause 7.3.4) |
Crush |
IEC 62133-2:2017 (Clause 7.3.5) |
Free fall |
IEC 62133-2:2017 (Clause 7.3.3) |
Over-charging of battery |
IEC 62133-2:2017 (Clause 7.3.6) |
Forced discharge |
IEC 62133-2:2017 (Clause 7.3.7) |
3) “Safety requirements for electrical equipment for measurement, control,and laboratory use” |
Mains Supply |
IEC 61010-1:2010 (Clause:5.1.3) |
Rs. 65,007/- |
Equipment temperature limits and resistance to heat |
IEC 61010-1:2010 (Clause: 10.1-Cl.10.4) |
Single fault test |
IEC 61010-1:2010 (Clause: 4.4.4) |
Durability of markings |
IEC 61010-1:2010 (Clause: 5.3) |
Determination of ACCESSIBLE parts |
IEC 61010-1:2010 (Clause: 6.2) |
Touch Current |
IEC 61010-1:2010
|
Protective Bonding |
IEC 61010-1:2010 (Clause: 6.5.2) |
Plugs & Connectors (Capacitor discharge test) |
IEC 61010-1:2010 (Clause:6.10.3) |
Clearance & Creepage distance |
IEC 61010-1:2010 (Clause: 6.7.2.1 & 6.7.2.3, 6.7.3.3) |
Humidity conditioning test |
IEC 61010-1:2010 (Clause: 6.8.2) |
Cord entry test |
IEC 61010-1:2010 (Clause: 6.10.2.1) |
Cord anchorage test |
IEC 61010-1:2010 (Clause: 6.10.2.2) |
Stability test |
IEC 61010-1:2010 (Clause: 7.4) |
Drop Test |
IEC 61010-1:2010 (Clause: 8.3) |
Limited Energy Circuit measurements |
IEC 61010-1:2010 (Clause: 9.4) |
Impact Test |
IEC 61010-1:2010 (Clause: 8.2.2) |
Stress Relief |
IEC 61010-1:2010 (Clause: 10.5.2) |
Ball Pressure Test |
IEC 61010-1:2010 (Clause: 10.5.3) |
4) "Standard for Environmental Testing of Telecommunication Equipment, (QM-333: march, 2010)" |
Low temperature Test (Cold Cycle) |
Test no. 1 Section 3 QM-333: march, 2010 |
Rs.65,007/- |
High temperature Test (Dry Heat Cycle) |
Test no. 2 Section 3 QM-333: march, 2010 |
Tropical Exposure Test (Damp Heat Cycle) |
Test no. 3 Section 3 QM-333: march, 2010 |
Rapid Temperature Cycle Test |
Test no. 4 Section 3 QM-333: march, 2010 |
Damp heat (Steady State) |
Test no. 5 Section 3 QM-333: march, 2010 |
Sealing Test (GAS tightness) / High altitude test |
Test no. 7 Section 3 QM-333: march, 2010 |
5) "Mobile Phone Handsets Part 3 Indian Language Support for Mobile Phone Handsets - Specific Requirements (First Revision) IS 16333:(Part 3)2017" (TEC ER no:. TEC/ER/MT/MUE-001/01/APRIL 2018 Cl. No. 5.4) |
Language supportable test/ Marking requirements on Mobile phone |
IS 16333(Part 3):2017 Clause 1, 2, 3, 4, 5, 6, Annex A, B & C |
Rs.50,007/- |
(Reference standard IS 16350:2016+A1:2017 for Enhanced In-script Keyboard Layouts) |
6) Mobile Phone Handsets Part 1 Safety Requirements |
Cl 4.8 International Mobile Station Equipment Identity(IMEI) |
IS 16333(Part 1):2015 Cl 4.8 |
Rs.45,007/- |
7) Mobile Phone (TEC ER no:. TEC/ER/MT/MUE-001/01/APRIL 2018 Cl. No. 5.3) |
Panic button in new mobile handset |
Notification of Government of India Gazette Notification No. G.S.R. No. 436 (E) dated 22-04-16 GPS in new mobile hand set. |
Rs.45,007/- |
GPS in new mobile hand set. |
Notification of Government of India Gazette Notification No. G.S.R. No. 1441 (E) dated 23-11-2017 GPS in new mobile hand set. |
Rs.45,007/- |